Performance of PKI-based security mechanisms in mobile ad hoc networks

Security for ad hoc network environments has received a lot of attention as of today. Previous work has mainly been focussing on secure routing, fairness issues, and malicious node detection. However, the issue of introducing and conserving trust relationships has received considerably less attention. In this article, we present a scalable method for the use of public key certificates and their revocation in mobile ad hoc networks (MANETs). With the LKN-ad hoc security framework (LKN-ASF) a certificate management protocol has been introduced, bringing PKI technology to MANETs. In addition a performance analysis of two different revocation approaches for MANETs will be presented.     

用于磁场测量的高精度500A/30V零压开关直流稳流电源

研制了一种带有无源辅助网络的全桥移相脉宽调制零压开关(FB PSPWMZVS)高精度磁铁稳流电源,并在电磁铁磁场测量中得到应用,其电流稳定度在8h内优于±1×10-4。     

可信计算与可信网络

论文对主流的可信计算技术——TCPA和NGSCB进行了分析,并对可信计算平台(TCP)进行了研究,对基于可信计算的可信网络的三个基本属性进行了分析和研究,最后介绍了可信网络的发展现状。     

无线电车载监测站的信号采集与通讯系统

本系统采用LabVIEW对无线电监测信号进行采集和处理．并开发用户界面。在Delphi平台上运用远程访问服务实现了无线电车载监测站与中心固定站的通讯。LabVIEW主程序对通讯子程序进行调用。     

WPAN/WLAN应用环境下基于PER的链路自适应算法

本文重点研究基于包错误率测量的链路自适应算法，分析了包错误率与信道参数的关系，提出了一种有别于固定门限值方案的优化门限值方案。仿真结果表明，优化门限值方案的网络吞吐量要大于固定门限值方案和基于信干比估计的链路自适应算法，最大增幅可达12Mbit/s。在系统引入重传机制后，网络吞吐量将有所损失，但最大不超过1Mbit/s，相比较服务质量的提高是值得的。需指出的是，虽然分析和仿真均以HIPERLAN／2为例，但不失一般性，它们同样适合于WPAN/WLAN等类似系统。     

Performance characteristics of cascaded delay‐line node architectures in single‐path interconnection networks

Internally buffered multistage interconnection network architectures have been widely used in parallel computer systems and large switching fabrics. Migration from electrical domain to optical domain has raised the necessity of developing node architectures with optical buffers. Cascaded fibre delay line architectures can be seen as possible realizations of output and shared buffering in a 2 × 2‐switching element. These approaches can be used as buffered node architecture in a Banyan like interconnect. In this paper, we investigate and compare these approaches by using simulation methods. Different performance metrics, such as normalized throughput, average packet delay, packet loss rate and buffer utilization have been used under uniform and non‐uniform traffic models. Results show that the TC‐chain node Banyan network offer an improved normalized throughput and average packet delay performances under both traffic models without disrupting first‐in‐first‐out order of arrivals. The switched delay‐line requires fewer switching elements than TC and TTC architectures but at the cost of high packet delay. Copyright © 2004 John Wiley & Sons, Ltd.     

L'accessibilité à des traitements pour les troubles anxieux au Canada: Un commentaire.

Responds to Gauthier (see record 2004-17185-003) who commented on the two articles by Koerner et al (see record 2004-17185-001) and by Roberge et al (see record 2004-17185-002. The purpose of this response is to discuss the issue of limited availability of mental health services for anxiety disorders in Canada. From a public health perspective, the authors emphasize the importance of gathering Canadian empirical data on the organization of mental health services for anxiety disorders. Specifically more research is needed on care requirements, and the financial and structural barriers that restrict access to mental health services at the regional, provincial and national levels. The authors also discuss the role of psychologists in improving mental health care in Canada. Cost-effectiveness studies conducted in interdisciplinary practice environments could demonstrate the value added by psychology in the organization of mental health care for anxiety disorders. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

小波变换分离太阳射电频谱图中的纤维结构

太阳射电爆发纤维精细结构是太阳射电爆发活动中一类重要的观测现象,利用二维小波变换对纤维精细结构动态频谱图进行处理,分离频谱图中的纤维结构。首先对原始频谱图实行多层小波变换,由低频分量重构原始图像,就可得到爆发的背景信息,令原始频谱图减去背景并经过阈值处理后,便可将原始频谱图中的纤维结构很好地分离出来。     

可控震源施工中电台数据传输不良的原因分析及排除

可控震源在施工中,常常出现各种电台干扰,导致震源数据传输不正常或震源收不到仪器发出的遥控启动信号,影响正常施工.本文介绍了各种电台干扰引起的故障现象,分析了故障产生的原因,给出了故障的排除方法.     

Segmented polymer networks containing amino‐dendrimers

Polymer networks in which poly(propylene imine) dendrimers (Astramol?) are connected to each other by linear polytetrahydrofuran (polyTHF) segments, were prepared by two methods. The first method was a one‐step procedure in which bifunctionally living polyTHF, obtained by initiation of the THF polymerization with trifluoromethane sulfonic anhydride (triflic anhydride), was reacted with an amino‐dendrimer. This reaction was very fast but did not allow formation of the end products. The second method was a two‐step procedure. In a first step, living polyTHF, prepared with acryloyloxybutyl triflate as initiator, was grafted on an amino‐dendrimer, to form a star‐like, acrylate‐terminated polyTHF multi‐macromonomer with the dendrimer as core. In a second step, networks were obtained by Michael addition between the acrylate end‐groups and unreacted amino‐groups of the dendrimer. This cross‐linking reaction occurred spontaneously upon heating of the solution of the multi‐macromonomer with gelation times varying from a few minutes to a few hours, depending on the temperature and the composition of the prepolymers. With this method it was possible to prepare networks in the form of coatings or films. © 2003 Society of Chemical Industry